ROS - Agritec

Alpego DTEK Plus 600-ASPRO fronttank. 6 meter power harrow and pneumatic drill. Comes as a set with tube and hoses to complete your combination drill. The seed harrow at the back can lift and the drill can be taken off. The lid on the fronttank can be taken off as well. The ASPRO front tank is equiped with granulate applicator as well. 

• 6 meter working width!
• seed hopper lids open
• nearly all metal
• tractor and figure not included!

Due to the fragile nature not intended to play with.

Fiat 80-90-DT Supercomfort cab.

Well detailed tractor. Front weight can be taken off. Frontlinkage included and easy to install.

• all metal
• cab doors open
•  

Bednar Omega OO 6000F  grain drill by ROS. The frame is all made of metal and moves up and down for transport and to turn on head lands. 

• 6 meter working width!
• seed hopper lids open

Due to the fragile nature not intended to play with.

Horsch Maestro 24SV corn drill by ROS. The frame is all made of metal and moves up and down for transport and to turn on head lands. The lids on the grain tanks open. Get the job done quicly with 24 row at the time!

• 24 rows!

Due to the fragile nature not intended to play with.

Kuhn GF 13003T hay tedder. Pulled type machine that has the details like the real machine! Get the job done with a working widht 13 meters! 

• pretty much made of metal.

Kuhn FC 13460 RA disc mower. Pulled type butterfly mower that has the details like the real machine! Get the job done with a working widht 13,40 meters! Equiped with conditioner and conveyor belts.

• pretty much made of metal.

Fendt Favorit 3 2WD Fritzmeier. Very well detailed classic farm tractor. All made of metal. Front wheels are steerable. Bonnet opens.

Claas Quadrant 5300RC big baler by ROS. Well detailed and nearly all made of metal.

• side panels open
• steerable rear axle

Olimac Drago GT 12 corn picker by ROS. Is a 12 row unit that fits combines. Fitsd a Siku combine perfectly. Well made and quite good detail, however mainly plastic parts.

Kuhn Merge Maxx 440F hay merger. Is nearly all made of metal. Made of front mounted hitches.

Fendt Favorit 3 with sickle bar. Very well detailed classic farm tractor. All made of metal. Front wheels are steerable. Bonnet opens.

• limited edition of 1.000 pieces.

Fendt Favorit 3 4WD Fritzmeier. Very well detailed classic farm tractor. All made of metal. Front wheels are steerable. Bonnet opens.

Fendt Favorit 3. Very well detailed classic farm tractor. All made of metal. Front wheels are steerable. Bonnet opens.

Fiat Winner F 120 by ROS. A very detailed tractor. You can either choose to fit a realistic linkage or a Siku compatible linkage and hitch on the rear. The hitch also has a lid to hold the linkage in high position. You do this by removing the little plastic lid on top of the drawbar. This gives acces to a small screw to unbolt and change the hitch.

Doors and lid in the roof open and the panels can be removed to access the engine compartment.

• limited edition of 999 pieces
• individually numbered

Fiat Winner F 100 by ROS. A very detailed tractor. You can either choose to fit a realistic linkage or a Siku compatible linkage and hitch on the rear. The hitch also has a lid to hold the linkage in high position. You do this by removing the little plastic lid on top of the drawbar. This gives acces to a small screw to unbolt and change the hitch.

Doors and lid in the roof open and the panels can be removed to access the engine compartment.

• limited edition of 999 pieces
• individually numbered

Steketee EC-Weeder camera controlled hoe for the modern farmer! Nearly all made of metal and very detailed piece of equipment.

• 6 meter working width
• all metal
• folds for transport
• well built

Due to the fragile nature not intended to play with. Tractor of figure not included!

Ferbo Rain Turbocar Active G5 irrigation reel. Hose rolls out and machine can be put in transport position. All made of metal and fits most tractors with a pin in the drawbar. 

Idrofoglia Turbocar Active G5 irrigation reel. Hose rolls out and machine can be put in transport position. All made of metal and fits most tractors with a pin in the drawbar. 

Fiat 180-90 Turbo DT by ROS. A very detailed tractor that is nearly all made of metal. 

Rear window is open, doors can open and close on both sides. 

• Limited edition of 999 pieces!

Fiat 1880 DTH by ROS. A very detailed tractor that is nearly all made of metal. 

Rear window is open, doors can open and close on both sides. 

• Limited edition of 999 pieces!

Fiat 1580 DT by ROS. A very detailed tractor that is nearly all made of metal. The linkage fits an Accord quick coupler, so you can mount Siku compatible implements. The front linkage will also fit some of the UH implements.

Rear window is open, doors can open and close on both sides. 

• Accord quick coupler not included!
• implements or frontweight not included!
• Limited edition of 999 pieces!

 New Holland 8830 by ROS. A very detailed tractor that is nearly all made of metal. The linkage fits an Accord quick coupler, so you can mount Siku compatible implements. The front linkage will also fit some of the UH implements.

Rear window is open, doors can open and close on both sides. 

• Accord quick coupler not included!
• implements or frontweight not included!
• Limited edition of 999 pieces!

Yanmar V8 mini shovel. Is nearly all made of metal. The cab also has a nicely detailed interior.

• all metal
• cab door opens
• motor compartment opens

Yanmar SV 100 excavator on tracks. Is nearly all made of metal. The cab also has a nicely detailed interior.

• all metal
• cab door opens
• motor compartment opens