Implements

Claas Quadrant 5300RC big baler by ROS. Well detailed and nearly all made of metal.

• side panels open
• steerable rear axle

Olimac Drago GT 12 corn picker by ROS. Is a 12 row unit that fits combines. Fitsd a Siku combine perfectly. Well made and quite good detail, however mainly plastic parts.

Kuhn Merge Maxx 440F hay merger. Is nearly all made of metal. Made of front mounted hitches.

Steketee EC-Weeder camera controlled hoe for the modern farmer! Nearly all made of metal and very detailed piece of equipment.

• 6 meter working width
• all metal
• folds for transport
• well built

Due to the fragile nature not intended to play with. Tractor of figure not included!

Ferbo Rain Turbocar Active G5 irrigation reel. Hose rolls out and machine can be put in transport position. All made of metal and fits most tractors with a pin in the drawbar. 

Idrofoglia Turbocar Active G5 irrigation reel. Hose rolls out and machine can be put in transport position. All made of metal and fits most tractors with a pin in the drawbar. 

Yanmar V8 mini shovel. Is nearly all made of metal. The cab also has a nicely detailed interior.

• all metal
• cab door opens
• motor compartment opens

Yanmar SV 100 excavator on tracks. Is nearly all made of metal. The cab also has a nicely detailed interior.

• all metal
• cab door opens
• motor compartment opens

Bednar Swifter SO 6000F Profi seedbed preparator by ROS. The frame is all made of metal and moves up and down for transport and to turn on head lands. Has a drawbar but also comes with an attachement to pull the machine in the tractor lower linkage.

• 6 meter working width!

Due to the fragile nature not intended to play with.

Grimme Ventro 4150 potato sugarbeet harvester. A very well detailed machine. The harvester has nearly all the details of the real machine, including the detachable wheelset to support the header during road transport. Everyting can open and close, raise or lower pretty much like the real machine.

Pretty much all made of metal.

• full functional machine
• not intended for children to play with.

Merlo 44.9 CS Multifarmer by ROS. This is a nicely detailed machine that is nearly all made of metal. Front and rear axle are steerable. The machine comes with a pallet fork, pallet, bucket with clamp, man booth, grap for rond bales (takes 2 bales). The machine has a three point hitch on the rear that fits most Siku and Britains implements.

Cab door and side panel open.

Bos landleveller. The real machine has a working width of 3 meters. Has nice details like hydraulic lines, decals and lights. Basically fits all tractor with a pin in the drawbar.

The machine raises and lowers and the doors can be set in 3 positions to change the working width.

This is the machine in yellow, however the same machine is also available in yellow.

This is a re-production of the 2011 model for the 60 years BOS anniversary. Differences are the black cylinders, decals and the 60th anniversary box.

Limited edition of 500 pieces.

For more information about the Bos construction company, click the logo:

Bos landleveller. The real machine has a working width of 3 meters. Has nice details like hydraulic lines, decals and lights. Basically fits all tractor with a pin in the drawbar.

The machine raises and lowers and the doors can be set in 3 positions to change the working width.

This is the machine in yellow, however the same machine is also available in red.

This is a re-production of the 2011 model for the 60 years BOS anniversary. Differences are the black cylinders, decals and the 60th anniversary box.

Limited edition of 1.000 pieces.

For more information about the Bos construction company, click the logo:

Krone BigPack 1290 HDPVC  big baler. Nearly all made of metal.  Panels open and there is enough twine on board to last a full working day! 

• enough twine on board to last a working day
• panels open

Not suited for children to play with.

Krone BigPack 1290 HDPVC BaleCollect  big baler. Nearly all made of metal.  Panels open and there is enough twine on board to last a full working day! Collector cart folds in transport position.

• enough twine on board to last a working day
• panels open

Not suited for children to play with.

Kuhn Stronger ST 4000HD selfpropelled fieldsprayer.Very detailed and primarily made of metal. Booms resemble a working width of 36 meters. Track width resembles 2,80 meters. Mirrors retract, cab door opens and has a very detailed interior,

• frame is metal
• bonnet and cab door open
• 36 meter working width
• made by ROS

Not intended for children to play with.

Kuhn Espro 6000RC grain drill  by ROS. Very detailed and nearly all made of metal. Moves into transport position and is pulled by the tractor's linkage

• frame is metal
• markers can move
• seed hopper lid opens
• made by ROS

Not intended for children to play with.

Lemken Juwel 10 7 furrow plough by ROS. Very detailed and nearly all made of metal. The reversible plough can rotate and the wheel moves and turns over as well.

Not intended for children to play with!

Krone Big X 1180 forage harvester. A very detailed machine that is pretty much made of metal. The panels open like they do at the real machine. The header can be taken of and folds into transport position like the real machine. The rear wheels are steerable. This is the machine with "Lift Cab". So you can handle a tall crop! 

• panels open
• cab door opens
• headers are easy to take off
• comes with both, grass and maize header!

Fendt Ideal 7 corn combine by ROS.  Equiped with  12 row maize header. The header can easily be taken off. The unloading auger can move in and out like the real machine.

• chassis made of metal
• comes with two headers
• cab door opens
• adjustable straw chopper 
• made by ROS

Not suitable for children to play with.

Kuhn Merge Maxx 950 hay merger. Is nearly all made of metal, Folds in transport position and can make windrows of different widths. A must for the modern farmer to get clean hay in the shed!

• nearly all metal
• moves like the real thing
• can make different windrows

To see the real machine at work, click the photo:

Krone Big X 1180 forage harvester. A very detailed machine that is pretty much made of metal. The panels open like they do at the real machine. The header can be taken of and folds into transport position like the real machine. The rear wheels are steerable. This is the machine with "Lift Cab". So you can handle a tall crop! 

• panels open
• cab door opens
• maize header is easy to take off

Manitou MC18 rough terrain forklift. The rear wheels can steer and it comes with a plastic pallet!